SOLD Audiopulse Axis Phoenix Gold Ti12D Hybrid

[audio_phill 10+ year member]

1. Product:

Audiopulse Axis Top Assembly, PG Ti12D Motor

2. Specs:

Re = 2.2250 ohms

Fs = 25.1087 Hz

Zmax = 16.4296 ohms

Qes = 0.89

Qms = 5.7735

Qts = 0.7819

Le = 1.1476 mH (at 1 kHz)

Diam = 331.0000 mm ( 13.0315 in )

Sd = .086m^2 (133.3762 in^2)

Vas = 60.02 L

BL = 18.2488 N/A

Mms = 857.9711 g

Cms = 46.8294 uM/N

Kms =21354.0996 N/M

Rms = 23.4444 R mechanical

Efficiency = 0.0810 %

Sensitivity= 81.9635 dB @1W/1m

3. Description/Condition:

Both motor and Top assembly are used, the top assembly is fritosaregood's old one with one set of leads shorted to 12V so needles to say only one coil functions, lol so lets call it 1K rms, still has 30mm Xmax and in 3 cubes sealed it lookes very promising with an F3 in the upper 20's.

4. Price: :

$200 OBO plus shipping

5. Pictures:

Click to read more...

 

[audio_phill 10+ year member]

Offers?

 

[audio_phill 10+ year member]

Price update, lets try $200 Plus Shipping

 

[audio_phill 10+ year member]

okay, $200 shipped anyone? 1K SQ sub here with a sub 30Hz f3 in 3net...

 

[audio_phill 10+ year member]

Call it $180 shipped con us, or call it into service in my 4Runner on 1500, lol.

 

[audio_phill 10+ year member]

$160 for a last chance snatch. No lower, this is firm. Trades welcome

 

[tristanmay 10+ year member]

phill, hit me up when you can

btw thats my old motor =)

 

[Miguel mac 10+ year member]

Pm reply

 

[audio_phill 10+ year member]

Up Up

 

[dumple 5,000+ posts]

so its a partially working sub?

 

[audio_phill 10+ year member]

Sub works fine if considered a single 2 ohm, lol. Drop it in 3 cubes sealed with around 1K-1.5K rms @ 2 ohms and enjoy an f3 of just under 27Hz, lol. Works like I intended it too from what I had laying around, lol. Sub handles 1300 free air down to around 20Hz when the suspensions starts running out of excursion capabilities (3.5" P-P). It could be looked at as partially working I suppose if you need a 1 ohm or 4 ohm final load, but if ya make good power @ 2 ohms it works fine up to about 1500rms, lol. Even cools better than the 3HP motor did, not alot better, but some thanks to the extra holes drilled in the motor, lol. Temp went from 68F (ambient) up to just over 98F during a Sine wave torture session to make sure it was gonna stay together and not kill over.

 

[ciaonzo 5,000+ posts]

May not be the prettiest thing but that's a hell of a deal for that kind of performance.

 

[audio_phill 10+ year member]

$150 Con US and I promise you be happy, lol.

 

[rog2961 10+ year member]

intrested, so if this was back in working condition what would it handle? also what would be required to make it work 100% again? complete recone or new tinsel leads?

 

[rog2961 10+ year member]

also intrested in doing my first IB but not to sure if this would be a good candidate