shahir 10+ year member
CarAudio.com Veteran
I have a 2012 Lexus IS F w/Mark Levinson Audio System Package - I recently upgraded the sub stage, by removing the stock sub and adding an Illusion Audio C12 powered by a Mosconi AS 200.2. Right now I have tapped into the Front Left / Right Woofers from the stock amp to the AC LC2i. Can I tap into the Sub output from the Mark Levinson amp and sum it to the LC2i, if so... What Method should I do?
I have been told that the front channel woofers have a subsonic filter of 35hz, but I'm not sure if I can get my subwoofer to go lower by summing the sub output from the amp.
Current State:
Tapped into the Front Left / Right Woofer output from ML Amp to LC2i
Would This Work:
Bridge Front Left / Right Woofer output to one channel on LC2i and Sub output on the other channel?
or
Keep A side of the front woofer on one channel and add the Sub output on the other channel on the LC2i?
or
Remove the Front / Right Woofer, only wire Sub output to one channel and jumper it to the other channel on the LC2i?
or
Leave it alone, Keep it As - Is?
I have been told that the front channel woofers have a subsonic filter of 35hz, but I'm not sure if I can get my subwoofer to go lower by summing the sub output from the amp.
Current State:
Tapped into the Front Left / Right Woofer output from ML Amp to LC2i
Would This Work:
Bridge Front Left / Right Woofer output to one channel on LC2i and Sub output on the other channel?
or
Keep A side of the front woofer on one channel and add the Sub output on the other channel on the LC2i?
or
Remove the Front / Right Woofer, only wire Sub output to one channel and jumper it to the other channel on the LC2i?
or
Leave it alone, Keep it As - Is?