AQ HDC louder than SSD?

*Ace*
10+ year member

CarAudio.com Elite
Just wondering if a 15" AQ HDC with copper coils would be louder than my 15" SSD with copper coils. The amp is a Memphis PR1.1000 so 1000 watts at 1 ohm.

Currently my SSD is in a 3.5cf enclosure tuned to 34Hz. It plays the lows awesome, but is lacking in upper range bass. Would the HDC get as low?

 
apparently the HDC will not like just 1000 watts.
My 18 took 1kw just fine. It doesnt need 2kw or higher just to get loud. With that being said, just doing a straight swap out with the ssds, im not sure if you would gain much off the power you have op. I would stick with what you have until you get more power, and the aqs do not lack the lowend. It will definately be there..

 
I'm sure they will take more than that.//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
If anyone would know, that would be you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
i agree the hdc3 will murder the ssd on that power its a toss up though just try it and see with the hdc3 atleast you know you can add more power in the future. the hdc3 high end is amazing and even tuned at 38 mine hits the lows nicely.

 
I'm sure they will take more than that.//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
maybe 4000rms but thats about it...mine are COPPER //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 
That's not a fair comparison. HDC3 will be louder, but the SSD is an overall better daily driver IMO. However they will be louder, and crave more power. if your using the SSD off 1K keep it. if you where comparing a BTL to a HDC3 then that'll be a topic.

 
If anyone would know, that would be you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif Yep //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

maybe 4000rms but thats about it...mine are COPPER //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif
Now you didn't say rms wattage. For that I wouldn't rec. more than a solid 2500-3k.

For burps I've personally witnessed 2 AQ Copper coil 10's on individual Atomic 7k's. //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 
//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif Yep //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif


Now you didn't say rms wattage. For that I wouldn't rec. more than a solid 2500-3k.

For burps I've personally witnessed 2 AQ Copper coil 10's on individual Atomic 7k's. //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

This I can say that the man is correct

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

*Ace*

10+ year member
CarAudio.com Elite
Thread starter
*Ace*
Joined
Location
Las Vegas, NV
Start date
Participants
Who Replied
Replies
31
Views
1,900
Last reply date
Last reply from
Papermaker85
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top