ap30001d wiring?

[blabo219 10+ year member]

how should i go about hooking up 2 12" W7s to an ap30001d becuase the way i see it theres 2 different ways? am i right?

Click to read more...

 

[x2o 10+ year member]

I believe the 12W7's only come in single 3 ohm coils, so you can either wire them in parallel to 1.5ohm nominal or in series to 6 ohm nominal.

The Ap3000 is 2-ohm stable, so you should be fine wiring in parallel to 1.5, hopefully box rise lifts you up a bit. Wiring to 6 ohms would just be silly, lol.

 

[gboo559 10+ year member]

why would you hook up W7s to an audiopipe amp?

and wiring to 1.5 isn't smart unless you have GOOD electrical

 

[rmzsuzuki89 10+ year member]

What coils? My 13w7's were d1.5s. Idk if the 12"s come in that or not though.

 

[blabo219 10+ year member]

I could wire them together at 1.5 ohm and get around a little over 2k.. would that be safe to run on them?

OR

I could wire each seperate into each side for about 750 at 3 ohms?

not sure if those numbers are right

 

[blabo219 10+ year member]

I believe the 12W7's only come in single 3 ohm coils, so you can either wire them in parallel to 1.5ohm nominal or in series to 6 ohm nominal.
The Ap3000 is 2-ohm stable, so you should be fine wiring in parallel to 1.5, hopefully box rise lifts you up a bit. Wiring to 6 ohms would just be silly, lol.

the ap30001d is 2 1500s strapped and you can run it using 2 channels or bridge it and internally strap them

 

[blabo219 10+ year member]

What coils? My 13w7's were d1.5s. Idk if the 12"s come in that or not though.

single 3 ohm

 

[blabo219 10+ year member]

any suggestions?

 

[SicAudio 5,000+ posts]

get a real amp? other wise if ur electrical is good i mean really good wire them to 1.5 and run like hell lolz

 

[Twisted_0912 10+ year member]

get a real amp? other wise if ur electrical is good i mean really good wire them to 1.5 and run like hell lolz

heard those mb quarts are nice... //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[blabo219 10+ year member]

get a real amp? other wise if ur electrical is good i mean really good wire them to 1.5 and run like hell lolz

why is that? I had my last amp running about 2k rms @1 ohm

 

[Annnarbor84 5,000+ posts]

get a real amp? other wise if ur electrical is good i mean really good wire them to 1.5 and run like hell lolz

Nothing wrong with those amps at all. You must be one of those guys who pays for customer service

 

[Annnarbor84 5,000+ posts]

the ap30001d is 2 1500s strapped and you can run it using 2 channels or bridge it and internally strap them

You can run it bridged @ 2ohm or run each channel @ 1ohm. Bridged you can safely run the amp down to 1.3ohms, each channel can be ran safely @.5 daily.

 

[blabo219 10+ year member]

would i have problems running it on a 102 amp alternator?

I dont see why this is any different.. I was doing 2k @ 1ohm daily and it was fine

so how does this amp change that?

 

[J31Rob 5,000+ posts]

I could wire them together at 1.5 ohm and get around a little over 2k.. would that be safe to run on them?
OR

I could wire each seperate into each side for about 750 at 3 ohms?

not sure if those numbers are right

then why the fuck did you post them? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif