Anything Wrong With This Box?

[AceAnderson]

Just modeled a new box for my L5 12's, should be about 6.5ft3 @ 35hz. Everything all good before i get to building this up?

View attachment 26556418View attachment 26556419

Click to read more...

 

[Boomin_tahoe 5,000+ posts]

Who Sketchup'd that enclosure, you?

I see a few areas that could use some bracing. What amp you plan to power them with?

 

[BOOMINGRANDPA 5,000+ posts]

i was just wondering about port area cause box so big, maybe big enough just check air velocity

 

[Hertz Mafia]

I think that box should hammer!

 

[AceAnderson]

Yep, i did the maths/sketchup. What areas? I really didn't think it'd need bracing they're only getting 1200w.

How do I know if there's enough air velocity?

 

[Papermaker85 5,000+ posts]

Port in the middle.

 

[Papermaker85 5,000+ posts]

More port area.

 

[BOOMINGRANDPA 5,000+ posts]

Yep, i did the maths/sketchup. What areas? I really didn't think it'd need bracing they're only getting 1200w.
How do I know if there's enough air velocity?

i was wondering it to much, thats based on port area and power so now they know how much power subs have someone can check it..

 

[Boomin_tahoe 5,000+ posts]

Yep, i did the maths/sketchup. What areas? I really didn't think it'd need bracing they're only getting 1200w.
How do I know if there's enough air velocity?

Looks good. The back, left side and def put a dowl in the middle between bottom piece and top piece. Those are gonna flex the most.

 

[AceAnderson]

Follow up question, will this trunk wall affect my install? Car is a '94 Chrysler New Yorker.

View attachment 26556420View attachment 26556421

 

[Boomin_tahoe 5,000+ posts]

Car trunks are tricky sometimes to get loud.

 

[BOOMINGRANDPA 5,000+ posts]

Follow up question, will this trunk wall affect my install? Car is a '94 Chrysler New Yorker.
View attachment 26556420View attachment 26556421

doesn't your back seat fold down? make real sure box u design will go in the opening..

 

[Kam311]

A couple dowels will give you bracing and don't displace much.

 

[YukonXL04]

I would put a dowel in the middle behind each sub vertically, and at least 1 or 2 on the back wall to sub baffle

 

[AceAnderson]

doesn't your back seat fold down? make real sure box u design will go in the opening..

Unfortunately not, it's an actual wall