Anyone wanna help me with a design?

[Lil_KB 10+ year member]

I've got 31" wide, 16" high, and 19" deep to work with. I want it tuned to 32 htz. For 2 12" Type Rs. I'll paypal you a few bucks if the designs worth it.

Click to read more...

 

[Lil_KB 10+ year member]

bump...pretty simple design job here guys and once again i'll pay for it if it's well done.

 

[raven15 10+ year member]

look in the sticky thread for something.. i dont know how to design boxes good but this will be a bump to soo not complete waste.. good luck

 

[xluben 10+ year member]

http://www.subwoofertools.com/forum/ported-box.asp?Ew=31&Eh=16&Dia=6&Xmax=14&Vd=.08&NumW=2&Vb=3&Fb=32&Qts=&Vas=&Fs=&CE=0

That's the best I could do, but 3ft^3 is too small and 3.25" wide port is kinda narrow.

Do you have any more room to work with? If not maybe one driver ported or two sealed would be better.

I hope you like your REV's when you get them!

 

[slc72005 10+ year member]

mmmmmmmm if you made a box for the measurements you gave us that would be 5.4cf not 3cf.

so figure a big port and you have 5cf fr each sub, make the port about 14.5inch high and 6 nches wide by about 13 inches long and you should be good to go. (ill have to figure out the exact port dimensions for ya but htats a ruff idea)

 

[xluben 10+ year member]

what?

 

[Lil_KB 10+ year member]

I don't understand either

If absolutely necessary, I can go 48" wide x 18" deep x 16" tall. Are you sure 1.5 cubes ported per sub isn't enough?

 

[xluben 10+ year member]

(save some width)

http://www.subwoofertools.com/forum/ported-box.asp?Ew=40&Eh=16&Dia=6&Xmax=17&Vd=.08&NumW=2&Vb=4&Fb=32&Qts=&Vas=&Fs=&CE=0

or

(save some depth)

http://www.subwoofertools.com/forum/ported-box.asp?Ew=48&Eh=16&Dia=6&Xmax=17&Vd=.08&NumW=2&Vb=4&Fb=32&Qts=&Vas=&Fs=&CE=0

but you could just try them out in 3ft^3 and if you don't like it make another box //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif