anyone need 3d sketches?

[trevor87 5,000+ posts]

ahh thanks i got it now man lol

 

[FiFdYnUtZ 10+ year member]

could you sketch me up a box with these dimensions

3 ft wide, 18in tall...

for 2 type-r 12's on a v12 1000w amp

ported and tuned to 34hz...

do however many cubes you think will fit closest to them dimensions and will make them the loudest possible

thanks!!!

 

[audiobahnuser18 5,000+ posts]

hey man can u make me this 3d sketch people are telling me this one is kinda off but i did not make it but here's the specs i got.

 

[sniper007 10+ year member]

Box Measurements:

2 Side Boxes:

Top Peice: 18.5Wx8Dx13H

Bottom Peice: 18.5x12Dx13H

Mid Console:

Top Peice: 12Wx5.5Dx13H

Bottom Peice: 12Wx7Dx13H

this box is going into a GMC Sierra 01 Reg Cab, there for 2 12's. Hopefully u know what im doing here.

 

[SLIM3001 10+ year member]

Hi m8 could you run me up this box please if you have the time ??

( spec sheet )

MDF 18MM

EXTERNAL BOX ( Height 16 inch x Width 34 inch x Depth 15 inch )

PORT ( Length 22.5 X Height 14.5 x Width 2.5 )

Tuned to 35.05 HZ and 3.077 cu'ft NET

Its for a 15 inch sub

Thank's

OH and please add CUT LIST for the port if you can thank's

 

[SLIM3001 10+ year member]

Oh all so it's going to be sub and face both facing the same way so port and sub both on the same side. Thanks againe

 

[bluelceii 10+ year member]

http://www.subwoofertools.com/forum/ported-box.asp?Ew=36&Eh=16&Dia=9&Xmax=27&Vd=0.19&NumW=1&Vb=4&Fb=33&Qts=&Vas=&Fs=&CE=0