anyone know how to?

[davidfre21 5,000+ posts]

any one know how i could rig up 3 sups to a 2ch amp if its possible?

Click to read more...

 

[mgaidica 10+ year member]

subs? sups? well is it bridgable? hook it up like regular.... specs on ur subs? and amp?

 

[koolkustumz 10+ year member]

if its a 2 channel amp why do you need 3 sets of cables? get some rca dividers.

 

[davidfre21 5,000+ posts]

ok thx for the help but i didnt understand any of it. ok the amp is BOSS rev555 700X2ch(max) 125X2ch(rms) the subs i was looking at are three of the Rockford fosgate 3810, i think they like 200watt(rms) 400(max). and i was wondering if there was a way if i out them all in a box if i could rig them all up to my amp?

 

[mgaidica 10+ year member]

DVC or single voice coil?

 

[davidfre21 5,000+ posts]

Brand New Rockford Fosgate RFP3810 Punch Z serie Subwoofer Description Size 10 inch Type Woofer Voice coil Configuration - Single Material - Aluminum Description - 2.5" 4-Layer Cone Material Paper - FIBERlock Frame Material Frame - Stamped Material - Steel Surround Material Foam Description - BART Crossover Specifications Power handling(RMS) - 200 Watts Power handling(Peak) - 400 Watts Impedance - 8 Ohms Sensitivity - 85.7 db Vas - .507 Fs - 34 Qts - .507 Xmax - .51 Dimensions Depth Bottom mount - 5.375 in. Cutout - 9.3125 in. Displacement - 103.68 cu in. Enclosure Sealed box - Recommended Minimum Volume (Cubic Feet) - .625 Recommended Maximum Volume (Cubic Feet) - 1.5 Ported box - Recommended Volume (Cubic feet) - 1.0 F3(Hz) - 35 Number of Ports - 1 Port diameter(Inches) - 3 Port Length(Inches) - 13.25

that a discription i new at this so im no exactly sure what everything is. thx for the help

 

[mgaidica 10+ year member]

the only way i could think of 2 subs w/ a non-bridgable 2 chanel amp is to hook each channel to 3 voice coils, but thats with DVC subs. I'm to tired to think man, ill think about it and someone else might know something, and im just being dumb...

 

[davidfre21 5,000+ posts]

its all good thx for the help. it doesnt have to be that amp i could get a new one.

 

[Matador 10+ year member]

dat amp wont be enough for 3 subs. maybe 2 subs, but i dont' even know if that boss amp actually pushes what's rated at. check out at gettin a new amp

 

[davidfre21 5,000+ posts]

like i said i can replace the amp, but my question is if i can rig an amp to power 3 subs at once?

 

[davidfre21 5,000+ posts]

this amp wil be temporary

 

[fantomas 10+ year member]

its possible...but it mostly depends on the subs and what the amp can handle. if it can go down to 1 ohm, and you get 3...say...jl 13w7s..you can wire those three subs up to a 1 ohm load since they are 3 ohm svc.

 

[eengrms 10+ year member]

Originally posted by koolkustumz if its a 2 channel amp why do you need 3 sets of cables? get some rca dividers.

wtf???

Where at in Iowa are you from?

 

[dave_3148 10+ year member]

i doubt that amp will go at 1ohm for more than half a sec, lets see if it claims 700 watt maxx then your prolly gettin 200w rms, so i would just hook up 2 and give em 100 watts each

 

[DaBaller504 10+ year member]

i would just sale the amp, get a new amp, thats what i would do