anyone else want a folded horn designed for them?

[Death By Bass 10+ year member]

I'm in a good mood, and have nothing better to do, so, if someone is looking to get a folded horn designed, let me know.

would prefer if the enclosure was to go in an SUV, wagon, or van, as these are what a horn will work best in.

post your interest here.

I need full specs for the woofers, or as much as possible.

I'd also prefer it if the person actually made it... //content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif

Click to read more...

 

[JimJ 5,000+ posts]

The Mach5Audio 18"...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

T/S Parameters - MJ-18 - 8 / 4 Ohms

Fs = 30.4 / 28 Hz

Re = 7.2 / 3.2 Ohms

Qes = 0.39 / 0.34

Qms = 3.41 / 4.99

Qts = 0.35 / 0.31

Mms = 219 / 229 grams

Rms = 12.3 / 8.1 kg/s

Cms = 0.100 / 0.14 mm/N

VAS = 243.8 / 208.4 litres

Sd = 1029.2 cm2

Xmax = 12 mm

Cone Diameter = 36.20 cm

Recommended Box Sizes:

Sealed: 80 litres (2.8 cu. ft.)

Ported: 128 litres (4.5 cu. ft.) 30Hz tuning

EBS: 250 litres (8.8 cu. ft.) 18Hz tuning

 

[Death By Bass 10+ year member]

The Mach5Audio 18"...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
T/S Parameters - MJ-18 - 8 / 4 Ohms

Fs = 30.4 / 28 Hz

Re = 7.2 / 3.2 Ohms

Qes = 0.39 / 0.34

Qms = 3.41 / 4.99

Qts = 0.35 / 0.31

Mms = 219 / 229 grams

Rms = 12.3 / 8.1 kg/s

Cms = 0.100 / 0.14 mm/N

VAS = 243.8 / 208.4 litres

Sd = 1029.2 cm2

Xmax = 12 mm

Cone Diameter = 36.20 cm

Recommended Box Sizes:

Sealed: 80 litres (2.8 cu. ft.)

Ported: 128 litres (4.5 cu. ft.) 30Hz tuning

EBS: 250 litres (8.8 cu. ft.) 18Hz tuning

maybe I should specify 12inch or smaller? unless you have the whole back area of a van?

I got a PM from someone aswell, however, neither of you specified a vehicle...

 

[JimJ 5,000+ posts]

unless you have the whole back area of a van?

Ding ding //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

48" between the wheelwells really is the only constraint I have...we're talking 100+ cubic feet to play with here //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[sandbags 10+ year member]

4runner 19 cubes of space

 

[PESteele 10+ year member]

12" massive cw stage 2 in my van.

specs here

http://www.massiveaudio.com/broadband/products/subwoofers/competition/cw_boxinstruction_stg2v1.pdf

 

[Twistid 5,000+ posts]

can i get a folded horn design on an atomic ap/spl 12"

there are no specs on the atomicspeakers.com website //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[PESteele 10+ year member]

i asked first

 

[Randy Savage 5,000+ posts]

I'd like one with this airbrushed on the baffle:

 

[Megalomaniac 5,000+ posts]

single eu700 //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif please...for an HT setup..u still need specs?

Qts: .29

Qes: .30

Qms: 10.5

Fs: 28 Hz

Re: 3.2

Vas: 22 L

Mms: 50 g

Bl: 13.3 T*m

SPL: 85 dB

Sd: 114 cm^2

Xmax: 13 mm

Voice Coil: 38 mm

Magnet Width: 5.000"

Cutout Diameter: 6.000"

Mounting Depth: 3.500"

Weight: 7 lb

Total Height: 3.500"

Displacement: .04 ft^3

Outside Diameter: 7.250"

 

[Death By Bass 10+ year member]

maybe I should specify that I'll only design ONE horn at this point in time... seeing as it takes hours to do...

 

[Megalomaniac 5,000+ posts]

lol thats cool. i figured mine woud be the easiest for you since its an 6.5"