MakeshiftAudio 10+ year member
AudioRx
Well, how much did you pay for them? xD They're just wow.You mean this one
http://www.caraudio.com/forum/showthread.php?t=382068
Its mine and I have one more on the way //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif.
How bout 2 10's with two Arc 4000SE's pushing them birth sheets both at 4500+ //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif How does that sound?
I'm considering something very similar, just for the sake of it. Custom sub, out of some magnets I found, 9" OD, 1.25" thick, 3.5"ID which is nice for a 3.5" VC after milling/boring some out and adding the plate, 6 hole design. I have 6 good ones, and one with a major chip in it, and one broken into 3 pieces. xD I havn't decided what to do with them yet as for what they're going to be put into. I was thinking something around the lines of a 12", but a set of 10"s quad 4 would fit nicely. I would practically be making the motor, and have someone else (ie TeamPSI, woofercooker, etc) put a basket and cone on them, but they need to be 3.5" VCs, which would practically need to be custom made, or I can mill/bore out for 4" VC. //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif