Anyone bored enough to quickly 3d design?

[JeepSound 10+ year member]

Finally ready to build the box for my single cab Ram.

It's a truck style box with a...

13.5" bottom depth

10" top depth

20" height

24.5" width

It'll be for (2) 12" Soundstream Rubicons with around a 7" mounting depth.

Tuned to somewhere in the 34hz range if possible.

Basically I'll need two of the above boxes sharing the same back board with a 16" gap in the middle used to hold the amp. So it'll end up looking like this, only less shitty...

So if anyones bored, I could really use a 3D design with dimensions //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Click to read more...

 

[thegreatestpenn 5,000+ posts]

google sketchup > you

 

[Pioneer~Saturn 5,000+ posts]

That is a very small space...I wouldnt do it, unless that space is for each sub's enclosure..

 

[JeepSound 10+ year member]

That is a very small space...I wouldnt do it, unless that space is for each sub's enclosure..

Came out to a little over 2 cubes each according to the calculator I used...

This is with 1/2" MDF as well so that'll make a slight difference.

EDIT: I think I see what you're getting at... The dimensions I listed will be the chamber for each sub, if thats what you're asking.

 

[thegreatestpenn 5,000+ posts]

1/2" mdf is a no no

 

[IDSkoT 5,000+ posts]

1/2" mdf is a no no

My .75 cubed box is made out of 1/2. I've had no problems.

 

[Pioneer~Saturn 5,000+ posts]

Ok, that's better if those dimensions are for each sub..

 

[JeepSound 10+ year member]

1/2" mdf is a no no

Should be adequate for what I'm using it for. Definitely not something to get loud with, these subs are SQ subs and will only be seeing around 300-400W each so I don't see it being a problem.

 

[JeepSound 10+ year member]

ttt

 

[JeepSound 10+ year member]

Up

 

[JeepSound 10+ year member]

Double post. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif