Anybody have tips for box "sound"

[vetkilr 10+ year member]

Fuck pics, I want a vid //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif
Where is Brandon at? Maybe I could stop by...

The East SiiiiiiiiiiiiiiiiiiiiiDe

Vid will be comin:up2somet:

 

[80INCHES 5,000+ posts]

ok the previous designs have been off alittle but

if u going to do any sort of bandpass kicker recommends 4th order bandpass

as far as specs go

i would do 1.3 cubes sealed per 12 playing into a common 5.4 cube ported area with 108 square inch port 10 inches long

or 2 54 square inch ports 12 inches long

80

 

[vetkilr 10+ year member]

ok the previous designs have been off alittle butif u going to do any sort of bandpass kicker recommends 4th order bandpass

as far as specs go

i would do 1.3 cubes sealed per 12 playing into a common 5.4 cube ported area with 108 square inch port 10 inches long

or 2 54 square inch ports 12 inches long

80

I knew you would come out:

 

[xpl0it 10+ year member]

6000 watts is a little much. 3200 (800) on each L7 will be fine. I just want a louder system, i think 4 12" L7s off 3200 watts will get decently loud. 6000 watts would definitely need 2 alternators and at least 3-4 batteries in the back.

 

[xpl0it 10+ year member]

Ah, I just did my box plans and 8 cubes after port displacement, driver displacement, and bracing is enormous. What would be the lowest possible volume these could reside in (shared chamber).

 

[vetkilr 10+ year member]

Sealed or ported.

How low do you want it to hit, aka what music you listen too.