basshead442
Banned
Well I'm trying to design and enclosure to fit into my tiny 2008 Kia Rio's Trunk the sub I'll be using is a TC Sounds/PSI 3hp 18" (Its the axis 3hp motor) I'll just need some answers as to weather or not this design would work well. Here it is.
Dimensions: 15"H x 29" W x 28.5" D
Sub Upward
Sub Displacement: 0.22
# of Extra 3/4" Baffles: 1
Baffle Displacement: 0.32
Net Volume: 5.00 cubic ft
Tuning Frequency: 28.21 hz
Port Specs: I'll be using a single 6" Aero that is 14.75" long with it firing towards the drivers side of the trunk at the very back to give it something to load off of and to cut down on port noise I'm wanting to know if this method would be effective.
Dimensions: 15"H x 29" W x 28.5" D
Sub Upward
Sub Displacement: 0.22
# of Extra 3/4" Baffles: 1
Baffle Displacement: 0.32
Net Volume: 5.00 cubic ft
Tuning Frequency: 28.21 hz
Port Specs: I'll be using a single 6" Aero that is 14.75" long with it firing towards the drivers side of the trunk at the very back to give it something to load off of and to cut down on port noise I'm wanting to know if this method would be effective.
