Amps?
- Thread starter Jordan_Swanson
- Start date
- Replies 2
- Views 416
HHMMM....
Cadence Z9000-800 watts @ 4 ohms $200 off of ebay
RF 800.2 400x2 - $300 or so off ebay
JBL 600.1 600x1@2 or 1 ohm - $185 off ikesound.com
Autotek SS-550.2 550@ 4ohm bridged $205 off ikesound.com
Crossfire bmf 1000d (i think) 750@ 2 ohms(?) 225-250 used of some forums
Thats just some, serch on ebay for around 800 watts for the 2.
Justin
Cadence Z9000-800 watts @ 4 ohms $200 off of ebay
RF 800.2 400x2 - $300 or so off ebay
JBL 600.1 600x1@2 or 1 ohm - $185 off ikesound.com
Autotek SS-550.2 550@ 4ohm bridged $205 off ikesound.com
Crossfire bmf 1000d (i think) 750@ 2 ohms(?) 225-250 used of some forums
Thats just some, serch on ebay for around 800 watts for the 2.
Justin
Activity
No one is currently typing a reply...
Similar threads
How I would approach it is install your new amplifier and start using it.
Install a voltage gauge and if you see your voltage lowering then add...
- Started by Ellessucs
- Wiring, Electrical & Installation
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
- Started by Shomik Afi
- General Car Audio
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
- Started by strkrfan13
- Car Audio Classifieds
You don't need two amps. The speakers come with crossovers to help protect the tweeters.
- Started by loudcaprice5
- Speakers
Perhaps you changed something without mentioning it here? Maybe a loose turn on line? I dunno man...but we'll take it. Hopefully it keeps working. 👍
- Started by shaunthedon
- Wiring, Electrical & Installation 2
About this thread
New threads
-
-
-
Need advise for batteries & 2 amps
- Started by Ellessucs
- Replies: 4
-
-
