amps with dual pos./neg. power and grounds

[95Prober 10+ year member]

hi

i was wondering, if you have a pretty large amp that has 2 positive terminals to accept 0/1 gu., but you have just the single run of 0/1 gu., is it better to run it to just one of the two terminals and leave the other unused, OR split the 0/1 into (2) 4 gu. pieces for the terminals?? im assuming nothin would be different either way, but just thought id ask thx

Click to read more...

 

[maxxguy1 10+ year member]

if you are asking this question you don't need that type of amp

 

[95Prober 10+ year member]

if you are asking this question you don't need that type of amp

thx for the USEless reply, but my friend wants to know, not i

 

[mavster 10+ year member]

thx for the USEless reply, but my friend wants to know, not i

same applies to him...

 

[95Prober 10+ year member]

same applies to him...

are you and maxxguy1 twins??? couple of smart alecs

 

[fwb_1234 10+ year member]

It doesn't matter. Hook only one up because it's more aesthetically pleasing.

 

[mavster 10+ year member]

nope...

 

[JLJunkieMX107 10+ year member]

Apparently I did not understand the question. Its late, im faded.//content.invisioncic.com/y282845/emoticons/*******.gif.a649d21efc0d1fd4890a6428166586c1.gif

 

[req 5,000+ posts]

that last post was the most retarded thing evar.

get two of these, put your 0awg on it with a big fat 300A fuse (or something) and put two runs of 4 guage to the inputs. do the same with the ground.

http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=263-630