amp tuning? subsonic???

  • 3
    Participant count
  • Participant list
Subsonic keeps freq levels that are too low from getting to your subs, generally with ported boxes its nice to set the subsonic 10 hz under whatever your box is tuned to, so since your tuned to 38hz, set the subsonic to 28hz. by crossover do you mean High pass, i would set it at anything between 60 and 80, it dependz on where your mids are crossed.

 
set the lowpass o the amp around 80hz...make sure its a clean signal going to the amp...DON'T USE DECK OR EXTERNAL CROSSOVERS BEFORE THE AMP........OR YOU WILL SCREW UP THE SLOPES
is it teh lowpass, i get them conufsed lulz. but he is right.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
151
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
346
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
348

About this thread

memphis_vette

10+ year member
CarAudio.com Elite
Thread starter
memphis_vette
Joined
Location
Redding, CA
Start date
Participants
Who Replied
Replies
11
Views
8,645
Last reply date
Last reply from
Johnny Law.Lulz
20240519_201344.jpg

audiobaun

    May 19, 2024
  • 0
  • 0
Screenshot_20240519-213549.png

1aespinoza

    May 19, 2024
  • 0
  • 0

New threads

Top