Amp super easy question

[Octavio 10+ year member]

I have a Amp with this spec

» 2-channel car amplifier

» 200 watts RMS x 2 at 4 ohms (250 watts RMS x 2 at 2 ohms)

» 500 watts RMS x 1 at 4 ohms (4-ohm stable in bridged mode)

Conected to a CVR12 2 voice coil, what type of connection will I have to do to get

500 watts RMS x 1 at 4 ohms? or I can't do that.

Right know is running on 250 x 2 at 2 ohms, I wonder if 500 x 1 at 4 ohms would be better?

thanks just really apreaciated your help

Click to read more...

 

[jmanpc 5,000+ posts]

just wire the subwoofer in series to the amp, and give the amp a 4 ohm load.

 

[2loud4u 10+ year member]

How many times do you need to ask this?

been answered here

http://www.caraudio.com/forum/showthread.php?t=214311

 

[Octavio 10+ year member]

How many times do you need to ask this?
been answered here

http://www.caraudio.com/forum/showthread.php?t=214311

thanks, any difference runing on 4 ohms or 2 ohms? will one sound better them the other ?

 

[2loud4u 10+ year member]

No it will sound the same.

You will get more power from the amp at 2ohms

Also your amp is not 2ohm stable bridged

 

[Octavio 10+ year member]

No it will sound the same.You will get more power from the amp at 2ohms

Also your amp is not 2ohm stable bridged

Thanks 2 loud for your time , what the difference bewteen a 2 ohms stable or 2 ohms? I always read stable here stable there is stable connection a better conection? thanks

 

[g0t-milk 10+ year member]

2ohm stable means that the amp can perform down to 2ohms. it can go from 2~8ohms without problems. no lower than 2. meaning it is NOT stable at 1ohm or less