Amp suggestions? Please help

[Falder 10+ year member]

I need an amp that I can run my two Alpine Type R 12's on. I'm thinking a mono block amp that will push around 600 RMS @ 4 ohms. I've tried to do my own research but it gets discouraging sometimes not really being sure if I'm going about it right.

Any help is appreciated.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Click to read more...

 

[Andrew12 10+ year member]

Memphis MCD1000... 1100x1ohm

 

[Falder 10+ year member]

Am I looking at this stuff wrong or what? When I look on their website it's saying 300 RMS @ 4 ohms. //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[Falder 10+ year member]

I didn't wanna thread jack that other guys thread and didn't wanna make a new one when I had a recent one, so hopefully I get some answers on this.

Someone posted this and I have a few questions.

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp

I have 2 Type R 12's DVC at 4 Ohms

So if I use the first wiring method shown I can just run an amp at 1 ohm?

 

[ctmike 10+ year member]

yes you can wire the pair to 1ohm. post a budget and you'll get plenty of suggestions. but some amps that you can consider are a sundown saz1500, hifonics 1606, cadence txa1000d, ed nine.1, alpine pdx 1000.1, used pg xenon 1200.1.

 

[Falder 10+ year member]

Awesome, and thanks a lot for a good clear answer. Budgets plans don't usually work for me, I'm looking to run about 600watts (maybe 700watts now that this could be less costly) to each sub. I can work better with a goal amount to save rather than a budget, I'll have to save either way lol.

Seriously, thanks a lot man.