Amp sugg for mach 5 15's

[Diablo6699 10+ year member]

i need a suggestion for my 2 mach 5 15's. They r dual 4 ohm and 500 rms a piece and i need either a 1 ohm stable mono or a 2 channel bridged for at most $200 shipped

Click to read more...

 

[meistah 10+ year member]

well i dont have an amp i want to sell...but i bought the same 2 subs and im going to use a 1200w concept amp...so something inexpensive like a concept cc-d1200 or a viper 1200w amp would be good, as they can be found for that price

 

[jmanjr]

hifonics brutus, several floating around on forums ranging 135$-175$, refurbed orion 1200 would work going for 179$ plus shipping, shop around more, check out open box deals on car audio sites and things of that nature.

 

[denim 5,000+ posts]

Look around for a used Orion 1200D, Kicker KX1200.1,

 

there is an Exlie x1200.1 in the classified section of SSA for cheap, a little more than your budget, but awesome price for the amp.

 

[neonrt 10+ year member]

wire each in series, and then togethor in paralel, so a 4ohm load, and buy a pa amp and run at 4ohm. less thd than 1ohm, and about the right power for those subs at 4ohm. then if you ever want more with new subs depending on vc config, you can wire the amp down more, and get more power. it just leaves room for expansion without having to replace the amp.

 

[shiipseki 10+ year member]

Look around for a used Orion 1200D, Kicker KX1200.1, 

there is an Exlie x1200.1 in the classified section of SSA for cheap, a little more than your budget, but awesome price for the amp.

x2 on the exile //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Towncar 10+ year member]

x2 on the exile //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

That would be my choice