Amp stopped working while driving...

[gangstajpimpin 10+ year member]

As per smllysack's request:

Also, I re-did my ground connections just in case. It appeared as though one of my mini-anl fuses was broken, although at the amp it showed 12.4v...i ordered new fuses and ditched those so results will come tuesday night after probing with the DMM at the spots you tell me to //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif thanks

 

[gangstajpimpin 10+ year member]

Anybody?

 

[gangstajpimpin 10+ year member]

Where do i check with the multimeter?

 

[bump - N - ugly 10+ year member]

Are you getting voltage to the remote turn on?

 

[gangstajpimpin 10+ year member]

Yes, the voltage from the remote turn on is around 11v... The light on the amp is blue...just like normal...it just isn't putting out any voltage to the subwoofer //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[gangstajpimpin 10+ year member]

Im sad...i've tried everything... //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Grinder1989 5,000+ posts]

Send it to someone and have it fixed......

 

[IDSkoT 5,000+ posts]

Ok, as the title says my Alpine amp stopped working while i was driving.
All fuses are ok.

The input voltage was measured at 12.4v with car off

RCA cables are good.

Amplifier grounds are good. (Other amp's ground is hooked up to same spot, so its good (sanded down to metal and bolted down really good on chassis))

Output voltage to subwoofer is 0v //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Gains were also set properly, and my IDQ was receiving 400w.

What could be the problem?

Send it to me.