Amp quit, HELP PLEASE

[ARK_SWAMP_RIDER 10+ year member]

Got ready to set the gain on my amp a few minutes ago, cranked it up, and no reading on the MM. Looked over, the light on my amp wasnt on (like it wasnt getting power). I used the mm to check the wires, there is power to the amp. Any idea what could have happened? Thanks.

Click to read more...

 

[skadude016 5,000+ posts]

blown outputs

 

[fbi90909 5,000+ posts]

check your fuses.

improper ground.

your remote feed snapped or is disconnected.

 

[poundindak69]

check all your wires

 

[ARK_SWAMP_RIDER 10+ year member]

Fuse is good, current is passing.

I can take the MM and hook it where the positive and ground connect to the amp and get power readings, so I have power at the amp, just not going through it. It was working, I turned off the car, turned it on later and it wasnt working. No changes to wires or anything, so it should be good. Any ideas? Thanks.