amp question

[macsdad 10+ year member]

i know i am gonna get reamed for asking this, but here goes. I have a rf t1000bdcp with a 150amp in-line fuse that i want to run at 1ohm, will the apsm1500, which requires a 120amp fuse be less demanding on my electricals? or will i be giving up/losing output? i know how most feel about the apsm but not many of you like the newer rf stuff either. i started a thread about h/o alt. just need as much help as possible, all this is for daily so i don't need alot of high-end just decent sound. thanx in advance.

Click to read more...

 

[4OZGLOVES 10+ year member]

I can't see it really being much different of a draw.

 

[macsdad 10+ year member]

even with 30amps less on fusing? or does the less efficency take up the slack?

 

[rebelfromva 10+ year member]

I know my t1500 draws more than my apsm1500 if that helps? Hell my lights barely dimmed with the apsm.

 

[CAT MAN 5,000+ posts]

I know my t1500 draws more than my apsm1500 if that helps? Hell my lights barely dimmed with the apsm.

let me borrow that apsm saturday. see how stable they are at a show //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[rebelfromva 10+ year member]

let me borrow that apsm saturday. see how stable they are at a show //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

what you trying to wire it down to?

 

[CAT MAN 5,000+ posts]

what you trying to wire it down to?

1 but the way its been really hot lately i will push the limits. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif ill use my db drive for numbers still but demoes i want that ap lol

 

[macsdad 10+ year member]

would it be worth the trade, or would i be moving backwards?

 

[rebelfromva 10+ year member]

I have toolmaker 0 ins for it too :0. It puts in work though I'll tell you that. I'll bring it when I show up.

 

[CAT MAN 5,000+ posts]

would it be worth the trade, or would i be moving backwards?

3 steps back

I have toolmaker 0 ins for it too :0. It puts in work though I'll tell you that. I'll bring it when I show up.

i have 4 runs of 4 gauge to the db no 0 ...

 

[macsdad 10+ year member]

so i should keep the rf? is there a more efficient amp at 14-1500wrms @1ohm in the $2-300 range?

 

[rebelfromva 10+ year member]

saz1500 for around 300. or you could buy my t1500....

 

[macsdad 10+ year member]

won't both of those draw more current than the t1000?

 

[rebelfromva 10+ year member]

Yes but the saz is one of the more efficient amps.