KenC210 10+ year member
Senior VIP Member
Just ordered 3 sa 10's 2ohm. Going to wire then art 1.37ohm what is some good Amps to push these? I was think a CT sounds 2200.1 when it comes out.
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
For best results you'll really want to be able to see the cones from your listening position. Firing some 6x9s down at your feet or into the...
- Started by JTB321
- General Car Audio
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
- Started by RyanJ0022
- General Car Audio
- Locked
COMPLETED
WTB - Small Mono Amp WxDxH
NVX MVPA1
Best tiny amp
Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater
Can bump it all day long and barely gets...
- Started by AnthonyO
- Car Audio Wanted
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
- Started by saints747
- General Car Audio
Mine were as short as possible and still I had issues routing them cleanly
- Started by kanihoncho
- Wiring, Electrical & Installation
About this thread
New threads
-
Fuse Taps at 30amp with 16AWG....- Started by Paul Curtis
- Replies: 5
-
-
What type and placement of box for dual 8 or 10" shallow depth subs for 2011 Hyundai Veracruz?
- Started by kanihoncho
- Replies: 5
-
-
