Amp needed...

[segurousky 10+ year member]

I have a friend who wants to power an Image Dynamics ID10 v.3 4ohm DVC and his front and back speakers with just one amp. The front/back speakers are both rated at about 60 watts RMS @ 4ohms, but he doesnt feel like he needs to have that much power going to them. He thinks even half of that will be good. Now the woofer is rated at 250 Watts RMS and will have to be wired at 2ohms. He does want at least 250watts going to the woofer.

So do any amps come to mind to do this kind of job? on a $200 budget?

Click to read more...

 

[VoTran24 10+ year member]

I think that your friend is right on the part where you dont need to power speakers with rms. My brother powers his infiniti speakers with a punch 45 and thats like around 20 or 40 watts each and they sound fine. I then put in another amo that had 60 watts each and didnt notice a difference

 

[DFW40 10+ year member]

Something like this

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14062

It would be easier just to get two different amps.

 

[n2audio 5,000+ posts]

there aren't many of these still out there, but etronics says they have it in stock.

http://www.etronics.com/product.asp?icatid=306&stk_code=lanvhc900&svbname=309

50x2 up front and 260x1 at 2 ohms on the rear.

 

[segurousky 10+ year member]

Check this one out....

http://www.cardomain.com/item/USAUSC4085

can get it for about $150 shipped! Isnt us acoustics considered to be better than all of the above mentioned? 3-year warranty too!

 

[segurousky 10+ year member]

Comments anyone?