Amp is messed up after new speakers

[tee 10+ year member]

What would I mess up if I turned up the volume loud, causing the fuse to blow?

 

[Bake 10+ year member]

Unhook the wires going to the speaker and the RCAs going into the amp. Leave only the Power, ground and remote connected. Replace the fuse with one with the correct rating. Turn the system on to see if the light on the amp still flashes. If so, start looking for a new amp or a repair shop.

 

[nismos14 5,000+ posts]

Your remore wire and antenna wire are connected together aren't they?

 

[tee 10+ year member]

Unhook the wires going to the speaker and the RCAs going into the amp. Leave only the Power, ground and remote connected. Replace the fuse with one with the correct rating. Turn the system on to see if the light on the amp still flashes. If so, start looking for a new amp or a repair shop.

Thanks, that's the best answer I've seen so far. I will give a look into that on the weekend. I have absolutely no time during the weekdays to do anything since I work from 7-7.

Your remore wire and antenna wire are connected together aren't they?

Together into one wire? Nope.