WarPigsBravoCo
CarAudio.com Newbie
New install. Power, Ground, Remote On, RCA's connected. Ready to set gains with multi-meter. Turned on radio, amp powered on; however, the amp is making a hum/muted clicking sound. The sound increases or decreases as the volume on the radio is turned up or down. Is this expected on this amp (digital amps)?
Solved: Had the gains turned all the way up, not down, so I'm guessing the hum/muted clicking sound was the amp clipping the signal. Turned gain down and was able to configure gains with multi-meter.
Solved: Had the gains turned all the way up, not down, so I'm guessing the hum/muted clicking sound was the amp clipping the signal. Turned gain down and was able to configure gains with multi-meter.
Last edited: