amp help

[fast85_gt]

i have a avionixx 2400m class d amp says digital i have 2 4ohm subs im going to run them at 1ohm but on the amp it has (rem + - - + ) all class d amps i've seen they only have + - do i need to hook both my subs to (r+) and (l-) on the amp to be at 1 ohm or do i need to go to + - - + my local shop said to wire sub 1 to left chan. and sub 2 to right chan. and that would give me 1ohm but i thought it would be to wire bothe subs to + on right side and both subs to - on lelt side any help plz sorry if this sounds stupid but i just got off a 16 hour shift

Click to read more...

 

[fast85_gt]

bye the way i have both subs wired to 2ohms i just need to know how hook them to the amp to make 1ohm

 

[skittlesRgood 10+ year member]

like this. one + and one -

 

[fast85_gt]

yea but on my amp it dont say what 2+ -and if its digtal does it matter

 

[lincolntc690 10+ year member]

its internally "bridged", to make speaker connection easier. hook one to each set

 

[fast85_gt]

ok so just do what my local shop said one sub to ®+ - and the other to (L)- + and that will still give me 1ohm correct

 

[LoggedOut 10+ year member]

correct