amp for component speakers

[blabo219 10+ year member]

I haven't used an amp for my component speakers and was wondering how does it work when my door speakers are 60 wrms and my 6x9s are 100wrms?

should i just get an amp around 60wrms x 4 @ 2 ohms?

also the other option i was looking at was the alpine ktp-445 plug and play amp,http://reviews.cnet.com/8301-13746_7-10141821-48.html.

I am looking for more volume in them but also having an amp power them would have better SQ right?

Any suggestions would be great.

Click to read more...

 

[blabo219 10+ year member]

bump please help

 

[blabo219 10+ year member]

Bump. Please help

 

[millertime49 10+ year member]

you can get a 4 channel amp that does the 100 X 4.... then just run the gains lower on the 60 watt set.. most amps have gain settings for the front and the rear... hope this helps.. here is a amp that is good for the price ( i have had this one for a couple years )... http://www.powermaxelectronics.com/products/pc/viewPrd.asp?idproduct=229&idcategory=10

 

[blabo219 10+ year member]

And they are just run at 2 ohms right? I have infinity reference 6x9s and plate speakers

 

[nineball 10+ year member]

what model speakers are you running? most are a 4ohm final load and a decent set can usually handle a little more or a lot more) than their advertised ratings. that cadence amp is a great little amp and will probably suit you nicely.