amp for 3 10" kicker comp's

[ballistik101 10+ year member]

i have a friend that wants to put 3 10" kicker comps in his car but not really sure how many watts to feed them. any suggestions?

lets say money isnt an option. he jus wants to see wants out there. budget or high ends amps, doesnt matter

thanks ppl

Click to read more...

 

[Exploder 97 10+ year member]

whats the voicecoil config,,,, what kind of box does he have.

 

[bri487 5,000+ posts]

you could go with something like a kicker zx750.1 if you're on a budget. or if you want to step it up you can go with something like a diamond audio d6 1000.1, zapco ref 1100.1, or a JL 1000/1

 

[Hoodlum007 10+ year member]

Since you did not state the ohm load on the subs, you can go with a Phoenix Gold Xenon X600.1, with this amp you can run the subs at any load that falls inbetween 1 and 4 ohms and receive the full rms output from the amp.

 

[Cbass 10+ year member]

x2 on the Xenon 600.1 great amp

 

[tmoney 10+ year member]

x2 on the Xenon 600.1 great amp

how much does the xenon 600.1 actual do.

 

[ballistik101 10+ year member]

my bad the subs are a 4 ohm single voice coil, the ohm load is 1.34 and the box look like this

 

[ctmike 10+ year member]

agree with the xenon 600, great amp for the money. it'll do over 600w, some have said upwards of 800wrms. i think the last time i saw them on ebay they were going for $250 plus shipping? maybe a little more.

 

[ballistik101 10+ year member]

so the xenon 600.1 will be enough to power them?