amp for 2 12" rl-p?

chris96camaro
10+ year member

Foreign and Domestic
What amp do most people use to power two 12"soundsplinter rl-p's?

Ok i see that hifonics *****, does anybody know of a moderately priced amp that will put 600-700watts x2@2ohms?

Could i run the kenwood kac-9152(900rms@2ohms) to one of them for a while, then if i decide to get another strap another kenwood to it and run it like that?

 
check the sig, and if you want to buy an eD within this week a group buy is going on that saves you $50 making the total $300 (incl. s&h).

 
nine.1

i'd sell you mine, but this **** group buy is a better deal than I can give you //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Is the jbl 1201.1 a good choice? 1114 watts RMS x 1 @ 2 ohms 14.4V

Does jbl make good amps?

How about the MTX 1501D, 1000 rmsx1@2ohms, are MTX amps usually good about coming cloe to their rated power?

 
Is the jbl 1201.1 a good choice? 1114 watts RMS x 1 @ 2 ohms 14.4V
Does jbl make good amps?

How about the MTX 1501D, 1000 rmsx1@2ohms, are MTX amps usually good about coming cloe to their rated power?

ur getting 1200 at 1 ohm at 12.5 Volts from eD..........right now watt per dollar with build quality in the mix eD has the best amp in t hat range, matter of fact, ordered mine yesterday

 
ur getting 1200 at 1 ohm at 12.5 Volts from eD..........right now watt per dollar with build quality in the mix eD has the best amp in t hat range, matter of fact, ordered mine yesterday
How much is that @2ohms, because the subs can only be wired down to 2??

 
i dont think hifonics *****. however there are better amps. i dont have my rlpd4's yet but i do have a bx1500 and if it isnt good enough ill switch. but 200 bucks they are good for the buck i think. i have not tuned my 6400 yet but it sounds good as is.

 
u got dual 2?????????????? wtf? anyways.....900-1000 at two ohm
The subs are 12"rl-p, dual 4ohm , so they can only be wired down to 2 ohms...

And do you guys think one will be enough, i mean i dont know how loud these things get?

 
The subs are 12"rl-p, dual 4ohm , so they can only be wired down to 2 ohms...
And do you guys think one will be enough, i mean i dont know how loud these things get?


wrong.....u wire EACH to 2ohms.......run them together at 1 ohm. ur final load will be one ohm.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
146
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
340
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
338
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
391

About this thread

chris96camaro

10+ year member
Foreign and Domestic
Thread starter
chris96camaro
Joined
Location
Charlotte, NC
Start date
Participants
Who Replied
Replies
14
Views
608
Last reply date
Last reply from
denim
20240519_201349.jpg

Mr FaceCaser

    May 19, 2024
  • 0
  • 0
20240519_201344.jpg

Mr FaceCaser

    May 19, 2024
  • 0
  • 0

New threads

Top