toy4x
10+ year member
Member
I've been going through my system trying to find out which component is giving me alt whine. Got a good tip to use my Ipod to narrow down the whine. Well hooked it up to my Eq and got no noise at all. The only thing hooked up to the front input of the EQ is the stock HU's rca's . So obviously it has to be my stock Bose HU rca's. These are NOT speaker wires! These are still considered Low level. Remember this is BOSE....
Now how do I ground these considering there are like 8 wires? 4pos and 4 neg.
LF+ LF-
RF+ RF-
RR+ RR-
LR+ LR-
and I'm really only able to get to them through under the passenger seat. Well I guess I can get them from the back of the HU but their is almost no room, and I would have to cut the harness making it VERY difficult.
So should I run all the neg's together in one wire and ground them to the chasis of the HU? To the Vehicle? to the Battery? Use them from under the pass seat? or from behind the HU?
Thanks again for any help
Now how do I ground these considering there are like 8 wires? 4pos and 4 neg.
LF+ LF-
RF+ RF-
RR+ RR-
LR+ LR-
and I'm really only able to get to them through under the passenger seat. Well I guess I can get them from the back of the HU but their is almost no room, and I would have to cut the harness making it VERY difficult.
So should I run all the neg's together in one wire and ground them to the chasis of the HU? To the Vehicle? to the Battery? Use them from under the pass seat? or from behind the HU?
Thanks again for any help