This amp is in awesome condition. The picture doesn't have the cover on the controls, but it is included. It is also a little dirty in the picture. I am looking to get $200 OBO Plus shipping. Located in Canada. I also have it listed on ebay with a buy it now of $200 or best offer. Also listed is a Kenwood KFC XW1300DVC
SPECS
RMS Power (at 12V, 20Hz—20kHz)
Per channel into 4 ohms .................. 150W x 2 (0.08% THD)
Per channel into 2 ohms ....................... 300W x 2 (0.3% THD)
Bridged 4 ohms ........... 600W x 1 (0.3% THD)
RMS Power (at 14.4V, 20Hz—20kHz)
Per channel into 4 ohms .................... 225W x 2 (0.08% THD)
Per channel into 2 ohms ................... 450W x 2 (0.3% THD)
Bridged 4 ohms .................... 900W x 1 (0.3% THD)
Frequency Response .................. 10Hz—50kHz(+0,-1dB)
Signal to Noise (S/N)....... 110 dBA (referenced to rated power)
Input Sensitivity (for rated power) .......... 200mV to 4V
Slew Factor ............. greater than 5
Input Impedance ......... 10k ohms
Speaker Impedance ........ 4 or 2 ohms(stereo), 4 ohms (bridged)
Dividing Network ..................... 50Hz—200Hz HP/LP(12dB/octave)
Equalizer Center Frequencies .................. 50Hz—200Hz
Q Factor (bandwidth) .................... 10 — 1
Boost and Cut range .................12dB
Power Requirements ........... 11—16V DC
SPECS
RMS Power (at 12V, 20Hz—20kHz)
Per channel into 4 ohms .................. 150W x 2 (0.08% THD)
Per channel into 2 ohms ....................... 300W x 2 (0.3% THD)
Bridged 4 ohms ........... 600W x 1 (0.3% THD)
RMS Power (at 14.4V, 20Hz—20kHz)
Per channel into 4 ohms .................... 225W x 2 (0.08% THD)
Per channel into 2 ohms ................... 450W x 2 (0.3% THD)
Bridged 4 ohms .................... 900W x 1 (0.3% THD)
Frequency Response .................. 10Hz—50kHz(+0,-1dB)
Signal to Noise (S/N)....... 110 dBA (referenced to rated power)
Input Sensitivity (for rated power) .......... 200mV to 4V
Slew Factor ............. greater than 5
Input Impedance ......... 10k ohms
Speaker Impedance ........ 4 or 2 ohms(stereo), 4 ohms (bridged)
Dividing Network ..................... 50Hz—200Hz HP/LP(12dB/octave)
Equalizer Center Frequencies .................. 50Hz—200Hz
Q Factor (bandwidth) .................... 10 — 1
Boost and Cut range .................12dB
Power Requirements ........... 11—16V DC
