alpine mrp m500

[moptopklee 10+ year member]

just bought a new sub for my truck

kicker cvr 15 inch

with a alpine mrpm500

it has three settings on it

gain of course and bass eq

it also has lp filter what is this?

and how does it work?

which would make it sound the BEST

thanks for any help

Click to read more...

 

[revrider1 5,000+ posts]

Xover, what kinda box?

 

[moptopklee 10+ year member]

sealed box

 

[moptopklee 10+ year member]

any suggestions?

can i turn the bass eq all the way up and the gain about half way up?

or will that be to much

 

[moptopklee 10+ year member]

any help?

thanks.

 

[Alpine50 10+ year member]

I woudd set the LPF cross-over@around 50.The bass boost around 2/3 and your gain depending on the voltage of your pre-outs.If you have an Alpine headunit and have a remote bass knob installed in-line,put the bass knob on full ,and the gain on full,then when you turn the knob to the left ,the bass is less,to the right ,bass boost is on full.That is how the mrp-450m's are set for Alpine anyway.Hope that helps.................

 

[djeazie 10+ year member]

I woudd set the LPF cross-over@around 50.The bass boost around 2/3 and your gain depending on the voltage of your pre-outs.If you have an Alpine headunit and have a remote bass knob installed in-line,put the bass knob on full ,and the gain on full,then when you turn the knob to the left ,the bass is less,to the right ,bass boost is on full.That is how the mrp-450m's are set for Alpine anyway.Hope that helps.................

If you want to cook your amp and woofer do it his way^^^. Otherwise look at the stickys in the amplifier section. Read the gain setting tutorial. It will help you out.