Alpha 18's on 3250's

[Savag3 10+ year member]

tiny

it slams hard ! tho

 

[skadude016 5,000+ posts]

it slams hard ! tho

could slam harder //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Savag3 10+ year member]

could slam harder //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

151.0 @ 34hz on dash tl . . pretty sure they dont need any more port, box was designed by Steve.

edit : open for suggestions tho, do you know the parameters ?

 

[skadude016 5,000+ posts]

151.0 @ 34hz on dash tl . . pretty sure they dont need any more port, box was designed by Steve.
edit : open for suggestions tho, do you know the parameters ?

less than 6 inches of sq. port per cube is not enough

 

[Annnarbor84 5,000+ posts]

16 sq in. of port per cube, so you are about 10 off:crap:

 

[Savag3 10+ year member]

16 sq in. of port per cube, so you are about 10 off:crap:

oh so this is the general guideline ? hmm

 

[skadude016 5,000+ posts]

oh so this is the general guideline ? hmm

I use 12-15 sq. inches per cube. some people use more

 

[Savag3 10+ year member]

so wut is the result of less sq in ?

 

[Annnarbor84 5,000+ posts]

oh so this is the general guideline ? hmm

Yeah if you want it loud and to do hairtricks. Don't post if you cant take criticism. Sometimes were all wrong once

 

[Savag3 10+ year member]

Yeah if you want it loud and to do hairtricks. Don't post if you cant take criticism. Sometimes were all wrong once

who said i couldnt take criticism, you assume too much. I am more than willing to learn.

 

[Annnarbor84 5,000+ posts]

who said i couldnt take criticism, you assume too much. I am more than willing to learn.

Try a new enclosure sometime with the above recommended sq. in. Worst case scenario you are out a few bucks in material. I know a guy who had 4 9515's and 8500rms going to them. He couldn't even do a hairtrick in his Yukon:crazy: To small of port

 

[Savag3 10+ year member]

Try a new enclosure sometime with the above recommended sq. in. Worst case scenario you are out a few bucks in material. I know a guy who had 4 9515's and 8500rms going to them. He couldn't even do a hairtrick in his Yukon:crazy: To small of port

yea im looking at a few different designs right now, even if it only gains a small amount its still a gain . . probly like $100 in 1" mdf . . so . .

 

[tv559 10+ year member]

yea im looking at a few different designs right now, even if it only gains a small amount its still a gain . . probly like $100 in 1" mdf . . so . .

Hey Savag3 where are you located? Wouldnt mind checking your system out..

 

[Johnny Law.Lulz 5,000+ posts]

im sorry but those wheels look ignorant on that truck, looks like some white trailer trash boy tryin to act black with a redneck truck.

 

[Savag3 10+ year member]

im sorry but those wheels look ignorant on that truck, looks like some white trailer trash boy tryin to act black with a redneck truck.

first of all, how do wheels look ignorant ? you are ignorant. You probly know some of your inbred redneck relatives that have owned broncos and now your stereotyping them to me, //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif im not white, trailer boy.