all you smart guys

[jusBloud 10+ year member]

does a high bl and alot of xmax mean the sub can get loud if the coil can take it? can a low excursion low bl sub get loud?

Click to read more...

 

[528hz 10+ year member]

Currently Active Users Viewing This Thread: 5 (4 members and 1 guests)

528hz , jeyventura , jusBloud , the Answer

^^^He's got the solution...

 

[Johnny Law.Lulz 5,000+ posts]

PM PV Audio

 

[Plottin4success 10+ year member]

PM PV Audio

Maybe I've been in the dome entirely too much lately, but I havent seen him on here in a while.

 

[jusBloud 10+ year member]

Currently Active Users Viewing This Thread: 5 (4 members and 1 guests) 528hz , jeyventura , jusBloud , the Answer

^^^He's got the solution...

lmao

 

[grassroots 10+ year member]

well the MT has relatively low excursion and very high bl and we all know what they can do... just some insight.

 

[1ndatrunk 10+ year member]

well the MT has relatively low excursion and very high bl and we all know what they can do... just some insight.

Bu without the high BL, could it get loud?

 

[SicAudio 5,000+ posts]

sure it can look at alot of older subs that needed big boxes they had 6-10 mm xmax and 5-10 bl and got plenty loud on very low power

 

[l7runner 10+ year member]

PA equip usually has very low xmax numbers but are extremely efficient and loud

 

[jusBloud 10+ year member]

i was wondering cause i bought this sub

Sd: 506.00 cm^2

Vas: 45.60 l

Cms: 1.27e-04 m/N

Cas: 3.26e-07 m^5/N

Mmd: 200.76 g

Mms: 207.20 g

Rms: 13.45 Ns/m

Fs: 31.0 Hz

Bl: 10.37 N/A

Re: 1.60 ohm

Qms: 3.00

Qes: 0.60

Qts: 0.50

Pmax: 1500.0 W

Spl - 85.9db

 

[SicAudio 5,000+ posts]

12" ??

that should get quite fking loud

based on the ts

 

[jusBloud 10+ year member]

12" ??
that should get quite fking loud

based on the ts

yep 12. you think it will get loud? no bl. and its a 4 inch coil.

 

[SicAudio 5,000+ posts]

it has a very light mms ( moving mass ) so the bl doesnt need to be huge look at a kicker L7 or brutus square bl about the same and the mms is very close and they get fking loud as hell

yeah i think the shit is gonna get loud on 1kw lolz

 

[jusBloud 10+ year member]

it has a very light mms ( moving mass ) so the bl doesnt need to be huge look at a kicker L7 or brutus square bl about the same and the mms is very close and they get fking loud as hellyeah i think the shit is gonna get loud on 1kw lolz

i don't think this will have the excursion those subs do. and less cone area. but i hope you're right. i've always wondered about this because when i look at subs it seens the high bl ones get stupid loud. and the ones with alot of xmax seem to get lower or play cleaner.

 

[the Answer 10+ year member]

Currently Active Users Viewing This Thread: 5 (4 members and 1 guests) 528hz , jeyventura , jusBloud , the Answer

^^^He's got the solution...

lol