I have 2 sets of 6.5" RSD's, so 4 mids and 4 tweets. Im going to install this system into my jk wrangler and i also have 2 kenwood kac-7205 2 channel amps. should i run passively to the speakers or go active and use one amp for the 4 mids and another for the tweeters? the specs on the amp are
170 W x 2 @ (4Ω)
250 W x 2 @ (2Ω)
500 W x 1 @ (4 Ω) Bridged
I could run 2 mids on one channel and the other 2 on the other for the single amp dedicated to the mids.
2x4Ω SVC speakers will run at 2 Ω's on each channel so each RSDs will be getting about 125 rms each from the amps. This is also vice versa for the tweeters and the other amp. What's your opinion on my situation?
