9855 xover question

[MrSwiss 10+ year member]

they apply to both i believe, i know its true with my HU. the HU xover overrides my external amp xover, so i leave it off on my HU. he can try crossing it over at 100hz.

Click to read more...

 

[supa_c 5,000+ posts]

Eq is for everything.

Did you tell him he can also adjust the MX level

 

[Chevyaudio 5,000+ posts]

Turn the MX off //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[supa_c 5,000+ posts]

It shure does

3 levels

 

[supa_c 5,000+ posts]

n00b

totally makes a diff in the sound

 

[azbass 5,000+ posts]

supa dosnt know what the mx is

 

[ecaREJECT 10+ year member]

they apply to both i believe, i know its true with my HU. the HU xover overrides my external amp xover, so i leave it off on my HU. he can try crossing it over at 100hz.

accually if the HU xo is 12db and the amp xo is 12db than you would just have a 24 db slope.

the exxcessive movement in the driver is probbally a couple diffrent things, I would guess you have a ton of power going on and no enclousure behind the speaker. Even with no enclousure you can get a speaker to handle decent and have good responce. I would suggest running the speaker in a enclousure and eq ing down things that are too loud.

For instance if you want more bass dont turn up the low bass turn down the high basskinda thing goin on it sounds like. Dont boost any bass on deck or amp to speaker having problem. Get eq and turn down frequincy than makes speaker sound distorted allowing the rest of the speakers potential be used on bands that can agree with.

 

[supa_c 5,000+ posts]

supa dosnt know what the mx is

Even though i have a 9855.....