jeepguylv
CarAudio.com Elite
hey ya'll, I am getting ready to start on my build soon so I thought I would start this thread and share with you what I am doing.
first off a few thanks to some people I have purchased some of these items from that made this build possible.
a1mcalister1- for the AQ 3500d and the AQ100.4 + SQ super tweeters
C1500martin - for the SQ 90.4 (sorry I traded for the 100.4 so it had matching logo)
Boomsday- for the 5 agm group 31 batt. and 0ga. wire (plus more on the way)
Hell4life- for fuses and fuse holder
eg9- for fuse holder, zip ties, and variouse wiring
Cherryman- for building the awesome enclosure
soundquebed- for the matching AQ200.2 (bought off ebay)
Vertex audio- for rca's and an awesome free t-shirt
Homegrown- for all the battery terminals, amp reducers, ect.
soundqubed- for the HDC418's and pro audio mids
few people on ebay - braided loom, heatshrink tube, switches, install accessories
sonic electronics- volt meters
I may have forgotten to mention a few so if I did just chime in.
ok so I plan on installing everything over the next couple of months since work has been busy.
so to start here are some photos of the jeep and some of the equipment. I have more coming and will post when it arrives.
also I will be doing other work to it in the mean time as well like the paint for one.
equipment list:
2) AQ 3500d1 amps
2) HDC4 18's
4) soundqubed pro audio mids (I also have 4 AQ pro audio mids on the way, more on that later)
2) soundqubed super tweeters
1) AQ4 100.4 prototype
1) AQ 200.2 for extra mid bass
2) AQ super tweeters
90ft. roughly of 0ga. wire
100ft. ea. of blue and black braided loom
200ft. of 8 ga. speaker wire
5) group 31 AGM batteries
1) 200 amp alt. ( debating if I should add another 200 amp since I can get it cheap or doing 1 320 amp. opinions welcome on this)
h/u hasn't been decided yet
I also have coming 2 IA 40.1 amps that may go in instead of the AQ's or I may decide to wall later and add 2 more 18's
here are some photos and I will update on progress
thanks for lookin
mike
under the hood before
my baby
I will be doing some kind of door plates just not sure how yet
this is the h/u I have now and not sure if I am going to update it but I probably will
here is where I have to try and fit everything lol
here is some of the equipment
and the batteries
cable
I have 4 of these, 1 for ea. amp, I know I really don't need it but thought it would look cool.
first off a few thanks to some people I have purchased some of these items from that made this build possible.
a1mcalister1- for the AQ 3500d and the AQ100.4 + SQ super tweeters
C1500martin - for the SQ 90.4 (sorry I traded for the 100.4 so it had matching logo)
Boomsday- for the 5 agm group 31 batt. and 0ga. wire (plus more on the way)
Hell4life- for fuses and fuse holder
eg9- for fuse holder, zip ties, and variouse wiring
Cherryman- for building the awesome enclosure
soundquebed- for the matching AQ200.2 (bought off ebay)
Vertex audio- for rca's and an awesome free t-shirt
Homegrown- for all the battery terminals, amp reducers, ect.
soundqubed- for the HDC418's and pro audio mids
few people on ebay - braided loom, heatshrink tube, switches, install accessories
sonic electronics- volt meters
I may have forgotten to mention a few so if I did just chime in.
ok so I plan on installing everything over the next couple of months since work has been busy.
so to start here are some photos of the jeep and some of the equipment. I have more coming and will post when it arrives.
also I will be doing other work to it in the mean time as well like the paint for one.
equipment list:
2) AQ 3500d1 amps
2) HDC4 18's
4) soundqubed pro audio mids (I also have 4 AQ pro audio mids on the way, more on that later)
2) soundqubed super tweeters
1) AQ4 100.4 prototype
1) AQ 200.2 for extra mid bass
2) AQ super tweeters
90ft. roughly of 0ga. wire
100ft. ea. of blue and black braided loom
200ft. of 8 ga. speaker wire
5) group 31 AGM batteries
1) 200 amp alt. ( debating if I should add another 200 amp since I can get it cheap or doing 1 320 amp. opinions welcome on this)
h/u hasn't been decided yet
I also have coming 2 IA 40.1 amps that may go in instead of the AQ's or I may decide to wall later and add 2 more 18's
here are some photos and I will update on progress
thanks for lookin
mike
under the hood before
my baby
I will be doing some kind of door plates just not sure how yet
this is the h/u I have now and not sure if I am going to update it but I probably will
here is where I have to try and fit everything lol
here is some of the equipment
and the batteries
cable
I have 4 of these, 1 for ea. amp, I know I really don't need it but thought it would look cool.