880prs network mode muting q

[Flipx99 5,000+ posts]

btw, sorry I drug your thread OT nismo

 

[nismos14 5,000+ posts]

Oh I don't mind, I already figured out my answers //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[nismos14 5,000+ posts]

Depends....
The digital design c4 + s4 is the best combo (I like matching amps)

The c4a does 100x4@4ohms, so that can handle the midrange and tweets

The s4 does 100x2@4ohms and then 200x2@4ohms. However, the rear channels can bridged to do 700@1 ohm.

According to the link, I should be able to bandpass that midbass with the c4 to make it work correct.

http://www.ddaudio.com/dd/amp/amp.asp?series=S

http://www.ddaudio.com/dd/amp/amp.asp?series=C

Looks good, it seems like you'd be in good shape with that setup... but it might be easier to get more flexibility with something like the PPI DCX-730 along with those amps.....

 

[Flipx99 5,000+ posts]

I just need a small dome mid. It is a toss up between the DLS, Dyn, and the Usher. Usher is winning at the depth and price category.

 

[nismos14 5,000+ posts]

Oo but the dls looks soooooooooooooo sweet //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[CAMSHAFT 10+ year member]

care to explain?

AMP #1 Left side Mid and tweet on first two channels and bridge the other two channels for the midbass.

AMP #2 Right side Mid and tweet on first two channels and bridge the other two channels for the midbass.

 

[nismos14 5,000+ posts]

Ah so then he'd need 3 amps? ... an additional amp for subwoofers... makes sense though because then he can run the 3 way active from the hu, and use a pass through if available from the amps to his mono amp........

 

[Flipx99 5,000+ posts]

AMP #1 Left side Mid and tweet on first two channels and bridge the other two channels for the midbass. AMP #2 Right side Mid and tweet on first two channels and bridge the other two channels for the midbass.

Are you saying this:

Left Channel 1 goes to left tweet

Left Channel 2 goes to left midrange

Bridge channels 3 and 4 to for midbass?

Like Nismo said, it would require 3 amps.