Sold 6.5" Pioneer REV component set

[tsenfw 10+ year member]

New price $55 Shipped! 6.5" Pioneer REV component set

Mids have a tinsel problem, most likely fixable but cannot guarantee it. They are connected to the terminal tabs but seem to be loose. If resoldered at the terminal tabs they will work but lose the connection again. Could be my shytty soldering skills, just don't have time to mess with these things.

Dustcap cut on one mid when trying to diagnose terminal prob, didn't affect operation, didn't notice any motor noise afterward.

Tweets and crossovers work flawelessly. 0db and -3db option on crossovers. Swivel flush mounts, and surface angle mounts.

Pics:

Click to read more...

 

[Ridinhi 5,000+ posts]

trades?

 

[tsenfw 10+ year member]

What you got?

 

[tsenfw 10+ year member]

Bump!

 

[tsenfw 10+ year member]

bump!

 

[jmanpc 5,000+ posts]

aw i wish i hadnt bought those memphis PR comps last week.

 

[Ridinhi 5,000+ posts]

Got some Cerwin Vega coaxials like new condition, model is HED 6"

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16873

Got a Kicker cvr. Black cone with the VR in Yellow. Back from like 2001. I personally like these comp vrs better than the ones of today. Sub is in perfect condition. Oh yeah, its a dual 4 12"

 

[nismos14 5,000+ posts]

Trade for pioneer ts-w303f free air 12" BNIB.

 

[tsenfw 10+ year member]

Alright, Ridinhi and Nismos.

Pics of subs, rms?, and will either of those work in a 2.0cu ft @ 32hz slot port? (I forget my port area)

I think one of those might work out. Looking for temporary bump till i recone my mag or claw mag.

 

[DejaWiz 5,000+ posts]

bump for some nice comps

 

[tsenfw 10+ year member]

$60 shipped!

 

[bikinpunk 10+ year member]

The problem with the leads... is it causing tinsel slap or what? Pictures of it in detail?

 

[tsenfw 10+ year member]

The problem with the leads... is it causing tinsel slap or what? Pictures of it in detail?

Don't know, possibly. The tinsels stay physically connected, the mids work for a while but then they cutout. When taking them out, if I move the positive tinsel around it'll immediately come back on. Tried resoldering a bunch of times (the one that I cut the dustcap off of) and again it'll work for like 10 minutes and then stop.)

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif i boxed them up to send out. I'll try to get some detailed pics tonight.

 

[bikinpunk 10+ year member]

don't worry about it. I actually thought these were a different set of Revs.

good luck with your sale.

 

[tsenfw 10+ year member]

Well, already took the pics. Here they are, as you can see they are connected. The white stuff is some kind of factory rubber covering. Looks like they can be resoldered.