500x1 @2 or 250x2@4 needed

[~Magick_Man~ 10+ year member]

i am putting a pair of ascendant audio assassin 8s in my friends truck and i just recieved the subs and now i just need to figure out what to power it with.

i was looking at a refurb directed 750d but they are out of stock now //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

so i need 5-600 watts at 2 ohms.

i am on a budget of 150ish, i would like to stay under that if at all possible.

so any suggestions would be appreciated.

~Magick_Man~

Click to read more...

 

[Polecat 5,000+ posts]

Kicker KX600.1, about 625-700 watts into a 2 ohm load

 

[3onDubs 10+ year member]

I have an excelon mono amp. It's been used for a year...bought it for $400, I'll sell it for $200. Here's the specs.

KAC-X810D Class D Mono Power Amplifier

Maximum Output Power: 1600 Watts x 1

Power Output at 2 Ohms, at 12V (1kHz, 0.5% THD): 600 Watts x 1

Power Output at 2 Ohms, at 14.4V (1kHz, 0.5% THD): 800 Watts x 1

Power Output at 4 Ohms, at 12V (20Hz-20kHz, 0.05% THD): 300 Watts x 1

Power Output at 4 Ohms, at 14.4V (20Hz-20kHz, 0.05% THD): 400 Watts x 1

Bass Management System

50-200 Hz low-pass crossover, 24 dB/octave

Infrasonic filter (15 or 25 Hz selectable, 24 dB/octave)

12 dB bass boost variable from 40-100 Hz (expandable to 6/12/18 dB when connected to a Kenwood Excelon receiver equipped with BMS controls)

Phase inverter (0-180 degrees)

Preamp outputs

Speaker short, low battery, thermal overload, and DC protection

Variable color indicator

Gold-plated terminals