4th Generation Camaro Installation

[ssj2xxgotenxx 10+ year member]

This question is for all the Chevy Camaro guys or anyone who has experience with these cars. I'm doing an installation in about a week and upon first glance, I didn't spot any location in the firewall to run the power wire through. This is usually the part of the installation that I usually get hung up on, so if you can provide a location, picture, or tutorial that could help me out, I'd appreciate it. Thanks in advanced.

Click to read more...

 

[ultimate157 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[djeazie 10+ year member]

Drill a hole a buy a nice gromet if you cant find a hole. Those camodes have a really tight engine bay.

 

[Trey803 5,000+ posts]

make sure to use a metal bit and not a wood bit

 

[casper97ta 10+ year member]

if the car is an auto you can use the pre-existing hole that would be for the clutch cable.

 

[duece212 5,000+ posts]

Drill a hole a buy a nice gromet if you cant find a hole. Those camodes have a really tight engine bay.

Gettin under the dash isn't any joy either.

Awesome cars...but **** *** to work on.

 

[Racerx250 10+ year member]

I have a 99 firebird. Luckily for me there was a hole on the driver side about mid way down. Was big enough to stuff 0/1 through it. Tough to make the sail panels stay in place with wire that large. Everything else was pretty easy.shoot me a pm if you need some help.