4ohm + 8ohm = What?

[JimJ 5,000+ posts]

High frequencies are down low where the door speakers are!

Huh?

Tweeters = high frequencies.

 

[pimpedout97x]

this thread will be turned to shit in about 10 min.

 

[Scoobydoo 5,000+ posts]

Huh?
Tweeters = high frequencies.

I think he is saying since he uses coaxials right now the highs are down low and he wants to add more tweets to get them higher up so they can blast out the windows

 

[phyphoestilic 5,000+ posts]

this thread will be turned to shit in about 10 min.

wasn't aware it started as anything else.

 

[Raffi 10+ year member]

Huh?
Tweeters = high frequencies.

I meant the speakers are low on my door and I wanted to put the tweets up on the pillars.

All I asked was 4ohm+8ohm =What?

 

[JimJ 5,000+ posts]

I meant the speakers are low on my door and I wanted to put the tweets up on the pillars.

All I asked was 4ohm+8ohm =What?

Which makes absolutely no difference for what I said. You're going to have high frequencies coming at you from two different places, with all the imaging and phase issues that brings...

 

[phyphoestilic 5,000+ posts]

I meant the speakers are low on my door and I wanted to put the tweets up on the pillars.

All I asked was 4ohm+8ohm =What?

12 or 6 ohms, depending how u wire it.

Going by the old saying "Let the baby have his bottle" if that bottle is filled with shit, doesnt matter to me cuse its not my baby.

 

[pimpedout97x]

Which makes absolutely no difference for what I said. You're going to have high frequencies coming at you from two different places, with all the imaging and phase issues that brings...

im going to have high frequencies coming at me from about 24 different places:laugh:

 

[Raffi 10+ year member]

Going by the old saying "Let the baby have his bottle" if that bottle is filled with shit, doesnt matter to me cuse its not my baby.

//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif WOW If I offended you by wanting to add some tweeters, please accept my apologies!

 

[JimJ 5,000+ posts]

im going to have high frequencies coming at me from about 24 different places:laugh:

You're also going to be deaf by 25, not sure that's something he wants to emulate.

 

[pimpedout97x]

i doubt i will be deaf @ 25.

but ok.

 

[JimJ 5,000+ posts]

i doubt i will be deaf @ 25.
but ok.

Chronic tinnitus by 25, deafness by 30.

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Scoobydoo 5,000+ posts]

TISH TSSS TISH TSSS TISH said the tweeter

 

[its_bacon12 10+ year member]

TISH TSSS TISH TSSS TISH said the tweeter

pretty obnoxious. dudes asking advice. dont post if you're going to be rude to him.

but anyways, if you wire them, they both wont get the same power the 4ohm will get twice the power assuming all other factors remain constant. so you will get high frequencies from those tweets but they probably wont be as loud but you dont know until you try.

just try it if it sounds horrible take them out and get 4ohm tweets

 

[iamamp3pimp 5,000+ posts]

12 or 6 ohms, depending how u wire it.
Going by the old saying "Let the baby have his bottle" if that bottle is filled with shit, doesnt matter to me cuse its not my baby.

buy 2 more tweets, wire them down to 4 ohms.

then you shuold be okay