4" speakers

[Circa1005 10+ year member]

That's very true. So some baffles, bass blockers and a pair of aura speakers. Thanks guys

 

[Why So Cereal? 5,000+ posts]

Depends on ur HU, bass blockers may be unnecessary.

If u get the baffles cut the a$$ out of em so the speaker's backwave goes into the door

 

[Louisiana_CRX 5,000+ posts]

Depends on ur HU, bass blockers may be unnecessary.
If u get the baffles cut the a$$ out of em so the speaker's backwave goes into the door

Im thinking that Alpine deck dont have hp crossovers built in... I could be wrong...If it has built in hp crossovers you wont need the bass blockers

 

[keep_hope_alive Premium Member]

I second the recommendation for the Aura 4000RPM - if you want a coaxial.

If it were me, I'd run a pair of these

Dayton Audio RS100-4 4" Reference Full-Range Driver 4 Ohm 295-378

I am using those 4" now and they sound good, play down to 100Hz with ease, and are well built. The response rolls off if you are off-axis - so their aiming is important. But even fully off-axis (in the kicks) they extend above 3kHz, so adding a tweeter solves that issue. I will move them on-axis next.

these tweeters could work with the Dayton 4's

Pioneer TS-T15 3/4" Soft Dome Tweeter Pair 267-288

and you get mounting hardware. I've used tweeters like this in the past, they are worth the money.

 

[Louisiana_CRX 5,000+ posts]

That's very true. So some baffles, bass blockers and a pair of aura speakers. Thanks guys

I searched your radio I thought it was a lower end model but I see it has built in HP filter so you won't need the bass blockers...just speakers and baffles

 

[Why So Cereal? 5,000+ posts]

I second the recommendation for the Aura 4000RPM - if you want a coaxial.
If it were me, I'd run a pair of these

Dayton Audio RS100-4 4" Reference Full-Range Driver 4 Ohm 295-378

I am using those 4" now and they sound good, play down to 100Hz with ease, and are well built. The response rolls off if you are off-axis - so their aiming is important. But even fully off-axis (in the kicks) they extend above 3kHz, so adding a tweeter solves that issue. I will move them on-axis next.

these tweeters could work with the Dayton 4's

Pioneer TS-T15 3/4" Soft Dome Tweeter Pair 267-288

and you get mounting hardware. I've used tweeters like this in the past, they are worth the money.

If u did go this route these are some other drivers to look into Tang Band W4-1320SJ 4" Bamboo Cone Driver 264-847

I LOVE mine! Still got em just not in my car ATM

I hear those Daytons are amazing too

 

[Circa1005 10+ year member]

So aura over Boston and alpine?

 

[keep_hope_alive Premium Member]

If u did go this route these are some other drivers to look into Tang Band W4-1320SJ 4" Bamboo Cone Driver 264-847

Those are too deep - he needs 2" and they are 2-5/8". The Daytons are 2-1/16" - so with the baffles you are there.

The Aura's will be better than Alpine SPS and entry Boston.

The Dayton/Pioneer option will be better than the Aura's and give you aiming options for the tweeters along with better midbass response.

But the Dayton's will be difficult to properly mount - they use a 6-hole pattern so you're gonna need something rigid to screw them to, then secure the baffle to the car. with the Aura's you are more likely to be able to use factory mounting holes. But good sound usually means custom. your call.

 

[Why So Cereal? 5,000+ posts]

Those are too deep - he needs 2" and they are 2-5/8". The Daytons are 2-1/16" - so with the baffles you are there.

Agh, forgot about that.

 

[Circa1005 10+ year member]

Just purchased the aura speakers. 36 dollars out the door. I really appreciate the feedback. Thanks again

 

[Why So Cereal? 5,000+ posts]

Thank us by posting a review on the forum after some listening time //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[keep_hope_alive Premium Member]

... and install pics!

 

[Circa1005 10+ year member]

Will do. Hopefully they come this week.

 

[Louisiana_CRX 5,000+ posts]

Parts express is usually quick on shipping

 

[Moofs 10+ year member]

Good choice! My first build was a 94 corolla and I ran entry clarion coaxial for all the speakers. If I could do it again I'd get the ones you just bought.

PLEASE START A BUILD LOG!