4 DP21 Wall Build

[rmzsuzuki89 10+ year member]

it might not be the STRONGEST mat in the world but lowes has an elmer patch kit that comes with a pretty big slab of mat and it doesn't burn at all.. not unless you start sanding it after you toss resin on it.. I was using gloves and ran out and was like eh I will just have itchy hands.. touched it and nothing..

I'll have to look into that when I go out to get more stuff. I'm gonna need more cloth and mat, and probably resin too soon. The **** resin is expensive, $32.xx a gallon. Hopefully I wont need too much lol.

 

[mbrooky 10+ year member]

Reeedonkulous!!!! MOAR!!!!

 

[rmzsuzuki89 10+ year member]

Liked this pic for some reason, gonna look real good when I organize the wires.

Put another layer of mat on, this is what it looks like now. I've glassed inside boxes on the wood, but never something like this with the cloth not against anything hard behind it. So I guess you could say that it's my first time glassing. Doesn't look too bad imo, just some places to smooth out.

 

[rmzsuzuki89 10+ year member]

Reeedonkulous!!!! MOAR!!!!

Gonna do more layers on that side and get the other side started tomorrow.

 

[rmzsuzuki89 10+ year member]

I'm thinking about drilling a couple holes in the wood behind where the fiberglass is and filling the area with expanding foam. Just gotta make sure I don't put too much in and pop the fiberglass out lol.

 

[thericanballer 10+ year member]

this build = ***

so frickin nice

 

[rmzsuzuki89 10+ year member]

this build = ***
so frickin nice

Thanks

I'm thinking about doing two Powerbass 4xl 8" midbass (one in each door) on a SAX 125.2, and two sets of either the 2xl or 3xl components on a SAX 100.4.

 

[rmzsuzuki89 10+ year member]

Getting started on the other side. Those white spots were messing with me. Their completely saturated, maybe just discolored or something lol.

My half inch thick Tupperware lol.

Gonna let that harden up a lil while I mow, then more layers of mat.

 

[O.G. D-Wet 10+ year member]

sweeeet

 

[matrxx dude 5,000+ posts]

goona be sick *** loud i imagine,but that sunroof is gonna cause issues.

 

[rmzsuzuki89 10+ year member]

sweeeet

Thanks

goona be sick *** loud i imagine,but that sunroof is gonna cause issues.

Thanks...I worry about that too lol. Gonna have to come up with something to make it work but not destroy it.

 

[rmzsuzuki89 10+ year member]

Got a layer of mat on. It went on smoother because I used a roller this time instead of a brush, worked quite well.

I'm almost out of resin, so I'll be done until I can get out and get some more. Maybe I'll do a lil work on the baffles and port or something.

 

[rmzsuzuki89 10+ year member]

It's been a while since I've done any work, but I did get a lil done today before going kayak fishing.

Made life a lil easier.

Nice tight fit.

When I took this pic, I realized that I went a lil overboard with the glue lol.

Screwed

Circles for hole cutouts, decided to use a screw instead of a pensil for some reason lol.

I'll hopefully get a lil more done tomorrow after riding and before fishing again. Gotta get out and get some more fiberglass too.

 

[rmzsuzuki89 10+ year member]

Cutting out holes.

 

[rmzsuzuki89 10+ year member]

Another test fitting.

Sub ready for test fit.

Gonna get the rest of the layers for the driver side baffle cut today. Maybe work on the other baffle, we'll see.