jbgarner12
10+ year member
Member
I recently purchased a 32440 Eclipse 4 channel amp for my mids/tweets...On this amp it has of course high pass/low pass switches and it also has L+R/Stereo/Mono?..Now I know what the mono would be for, but what do you guy's use for a four speaker set up? Right now I have it on L+R..I'm sorta a noob so I'm confused on which it should be on...
Speakers are 4 Boston Acoustics SL80
» 2-way plate speakers for 5"x7"
» copolymer woofer with rubber surround
» 1" Kortec® dome tweeter
» power range: 2-60 watts RMS (200 watts peak power)
» frequency response 45-20,000 Hz
» sensitivity: 90 dB
Eclipse 32240 specs
200W x 4 Channel Max. Power Output at 2Stereo
120W x 4 Channel 0.1% THD at 2Stereo, 20-20,000Hz@13.8V (RMS Continuous Power)
85W x 4 Channel 0.1% THD at 4W Stereo, 20-20,000Hz@13.8V (RMS Continuous Power)
Speakers are 4 Boston Acoustics SL80
» 2-way plate speakers for 5"x7"
» copolymer woofer with rubber surround
» 1" Kortec® dome tweeter
» power range: 2-60 watts RMS (200 watts peak power)
» frequency response 45-20,000 Hz
» sensitivity: 90 dB
Eclipse 32240 specs
200W x 4 Channel Max. Power Output at 2Stereo
120W x 4 Channel 0.1% THD at 2Stereo, 20-20,000Hz@13.8V (RMS Continuous Power)
85W x 4 Channel 0.1% THD at 4W Stereo, 20-20,000Hz@13.8V (RMS Continuous Power)