4/0 Awg *****es!

[helotaxi 5,000+ posts]

Contact a machine shop. A good shop could make you a bus bar setup tht would let you bolt that stuff on each side and then run 2-4 ANL fuses between the bars allowing you to run whatever size fuses you need.

 

[Rc 415 10+ year member]

Contact a machine shop. A good shop could make you a bus bar setup tht would let you bolt that stuff on each side and then run 2-4 ANL fuses between the bars allowing you to run whatever size fuses you need.

That sounds good to me, time to get out the phone book.

 

[QtrHorse 10+ year member]

Just so everyone can see, look below for a comparison of different size cables (both welding and amp wire/ cable).

Wire Comparison

Just so you know, that Lighting Audio wire is very thick/ large. It was larger than the MTX and Streetwires cable/ wire that I had and I am talking about the actual copper strands, not just the outer jacket.

Look below for a high amp fuse option at a reasonable price.

ANL fuse holder

You can get up to a 400 amp ANL fuse for the fuse holder above.

 

[Ruffy 10+ year member]

my god

 

[FoxPro5 5,000+ posts]

Is that garden hose!?!?! How do you cut it...seriously how do you?

 

[Prowler573 5,000+ posts]

Nice comparo pic, QtrHorse. Thanks for that.

 

[iamamp3pimp 5,000+ posts]

cust through it, around the edges, or get an angle grinder.

 

[99StangGt 10+ year member]

same size wire I run to a house from the power company, lol

 

[lilmaniac2 5,000+ posts]

an axe does a decent job cutting if its sharp lol

 

[QtrHorse 10+ year member]

Nice comparo pic, QtrHorse. Thanks for that.

I now wish I had put a tape measure, quarter or something like that , so you could compare it to something. I still have 1ft pcs of all that wire and may take another pic w/ something familiar to everyone in it.

 

[xpl0it 10+ year member]

How about a shot of the ends?
I'd like to see some comparison shots. I teammate of mine had some 4/0, and it really wasn't much thicker (wire wise) than some decent 1/0.

I know exactly what you're sayin. I am a firm believer that high quality 1/0 is more fit for the car audio application than 4/0 such as this.

 

[xpl0it 10+ year member]

Just so everyone can see, look below for a comparison of different size cables (both welding and amp wire/ cable).
Wire Comparison

Just so you know, that Lighting Audio wire is very thick/ large. It was larger than the MTX and Streetwires cable/ wire that I had and I am talking about the actual copper strands, not just the outer jacket.

Look below for a high amp fuse option at a reasonable price.

ANL fuse holder

You can get up to a 400 amp ANL fuse for the fuse holder above.

Or you can not be an idiot and get a dual ANL fuse holder and put two 250 amp or two 300 amp fuses in there.

 

[xpl0it 10+ year member]

Get this, it pwns..

http://www.cardomain.com/item/STISHD2ANL The terminals are pretty large, 1/0 has extra space, and that 4/0 doesn't look

too much larger

 

[QtrHorse 10+ year member]

Or you can not be an idiot and get a dual ANL fuse holder and put two 250 amp or two 300 amp fuses in there.

An idiot, thanks for pointing that out to me. I guess my wife has been right all along.//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[Rc 415 10+ year member]

Thanks for the link to that fuse holder, I'm going to buy one. Stand by for pics next to quarter!