3d box drawing?

[DonH 5,000+ posts]

Also can I ask what program this is and where I could get it

he is using google sketch up its free

 

[Deathstalker 10+ year member]

^^ yup, It's faster than using AutoCAD and SolidWorks. But I still use them from time to time.

 

[team3d 10+ year member]

Cool. I am downloading it now.

 

[DonH 5,000+ posts]

hey Deathstalker i still think dude needs atleast another port bro! each cubic foot needs about 11-13 square inches of port. each 4" aero is 12.56 square inches. with three thats 37.68sqin. maybe enough to get away with three. but since those are not flared aeros, which have less friction, he should at least add one more port bro just to be safe.

just some input

 

[RAM_Designs 5,000+ posts]

I'd never build a box with

 

[DonH 5,000+ posts]

I'd never build a box with
dats what im try to get at! dudes needs atleast another port if not two more!

 

[Deathstalker 10+ year member]

Since He wants to have the subs up and the ports back. I'm going to give him a 4th port when I send him the skp. Since the top only had room for 3. That will drop him down around .03 VM

 

[DonH 5,000+ posts]

Since He wants to have the subs up and the ports back. I'm going to give him a 4th port when I send him the skp. Since the top only had room for 3

fvck give him 5 shit port up the ***!

 

[Deathstalker 10+ year member]

Lets just make it an even 8 4" ports while we're at it vent mach of .00012 //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[team3d 10+ year member]

Well I can do 6 inch aeros and the ones im getting are going to be flared if that helps

 

[DonH 5,000+ posts]

Lets just make it an even 8 4" ports while we're at it vent mach of .00012 //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh: little much bro! haha

 

[Deathstalker 10+ year member]

Yea flared helps. And since they are flared you can get away with 4 instead of 6 but if you want 6 sure. I'll accommodate ya. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I'll tell ya this you won't have to worry about port noise with 6 flared ports, it will be none existent.

 

[team3d 10+ year member]

ok so what does that drawing look like. I was trying to use that program but it confused the shit out of me. 38 and 35 htz

 

[Deathstalker 10+ year member]

Here ya go bro. Enjoy Modified it and added a 4th port let me know if you want me to add another.

Edit. It won't let me upload. it's 1kb too big. PM your email I'll send you the .skp