Decado 10+ year member
CarAudio.com Elite
Ok, so i'm bringing the gains up on my amp getting ready for my SX, and i'm trying to set it to 600 rms @ 4 ohms bridged. So i'm setting the gain for each channel, and i set both gains to 24.5 volts, I then check what the voltage is bridged and i get 35...here is where the wtf factor comes in. I did the division and came up with 34.3 to set each channel to, i did this and then got 49 volts when i tested the bridged voltage. Is this fine? Should i leave each channel at 34.3 volts or is this a sign of some kind of amp problem? (i opened my amp up and looked at it and nothing looks burnt)
