3 Alpine swr-1241d / mrd-m1001

[TyRacing 10+ year member]

can 3 swr-1241d subs be connected to a alpine mrd-m1001?

Click to read more...

 

[thismightbepat 10+ year member]

Well of course. You would end up with a 3.64 ohm load if I'm not mistaken. check out rf.com's wiring wizard.

 

[themainjam 10+ year member]

http://www.rockfordfosgate.com/rftech/wiringwizard.asp there ya go.. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[TyRacing 10+ year member]

2.67 ohm load.

would it work?

how much rms would each sub get?

 

[JeffyZ33 10+ year member]

Get a guess of how much rms your amp puts out at 2.67 then divide by 3 //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

EDIT: I'll guess around 850rms. Divide by 3 and you get roughly 280rms each

 

[themainjam 10+ year member]

the subs are 8 ohm SVC? or 4ohm DVC?

 

[TyRacing 10+ year member]

4ohms dvc

 

[themainjam 10+ year member]

ok then he got it about right (830 divided by 3 ) but also watch out if you bridge it with certain amps a 2.67 will be ~1.34 to each channel which then that amp wont handle....

Good luck and read the manual //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif